HFU-X310

Manufacturers

Hardware

Login Form

Home

Sony Cameras

Remote Multi-Purpose HD Cameras

PDF

| Print |

E-mail

Overview
Features
Technical Specifications
Accessories
Manuals

HD Optical Fibre Interface Unit

The HFU-X310 is an optical fibre interface unit for use with the HDC-X310/X310K camera. The HFU-X310 can also be used with the HDC-X300 & X300K cameras. Utilising the HD-Sdi Input on the HFU-X310.

Compact Design

The HFU-X310 is a 2U-high, half-rack-wide unit with an optical fibre interface.

Long Cable Runs

Digital data - including external sync and camera control signals - can be transmitted between the HDC-X310/X310K and the HFU-X310 via an optical fibre cable. (*) This cable can be up to 1000 meters (3280 feet) long, which allows the camera to be installed virtually anywhere required. (*) A single mode fibre cable with LC connector is required for the connection between the HDC-X310/X310K and HFU-X310.

A Range of Interfaces

The HFU-X310 is equipped with a range of interfaces such as HD-SDI input, SD/HD genlock, and tally inputs. It also provides an 8-pin serial remote input to connect the RM-B750/B150, RCP-700 Series, or MSU-900/950. Output interfaces including HD-SDI, SD-SDI, computer XGA, and i.LINK (HDV) are offered via optional boards that are installed in the two slots located on the unit's rear panel.

Power requirements	AC 100 to 240 V, 50/60 Hz
Current consumption	Max. 0.6 A
Operating temperature	+5 to +40 °C (+41 to +104 °F)
Storage temperature	-20 to +60 °C (-4 to +140 °F)
Maximum cable length	Optical fiber cable (single mode): 1000 m (3280 feet)
Dimensions (W x H x D)	200 x 88 x 215 mm (7 7/8 x 3 1/2 x 8 1/2 inches) without projection
Mass	Approx. 2 kg (4 lb 6 oz)
Signal inputs/outputs
Remote	8-pin (1)
Genlock	BNC type (2), 3-level/2-level (VBS, VS) Sync block 0.3 Vp-p (when terminated), 75 O, loop-through
HD SDI input (*)	BNC type (1) Conforming to SMPTE 292M
OFC	Single mode, LC connectors (2), send/receive
Multi-connector	6-pin (1)
AC input	3-pin (1)

Supplied Accessories
Multi-connector plug	1
M4 x 4 scew	1
M3 x 4 scerw	2
OFC cover	1
Operation Manual	1

Optional Boards
	HFBK-HD1 HD-SDI Output Board The HFBK-HD1 is an HD SDI Output Board for the HFU-X310 Optical Interface Unit which is used with the HDC-X310/X310K HD multi-purpose camera.
	HFBK-TS1 iLINK (HDV) Output Board The HFBK-TS1 is an i.LINK (HDV) Output Board for the HFU-X310 Optical Interface Unit which is used with the HDC-X310/X310K HD multi-purpose camera.
	HFBK-XG1 XGA Output Board The HFBK-XG1 is an XGA Output Board for the HFU-X310 Optical Interface Unit, which is used with the HDC-X310/X310K HD multi-purpose camera.